Equipments

OPERATING PART Motor test bench for 1.5 kW electric pump unit

INDEPENDENT SYSTEM Interchangeable cabinet, disconnectable from the operating part (removable and interchangeable grid for student wiring).

The EcolClim communicating system allows the centralized management of an industrial type of air conditioning. This air-conditioning works with water (or glycol if installed outside) and does not require any specialist for installation and operation. The modification of the parameters as well as the graphic follow-up of the evolution of the temperature are done by Supervision under PC Vue.
- Switch the air conditioning on or off.
- Modify the air blowing setpoint.
- Modify the room temperature set point.
- Memorize the room temperature and the setpoint.
- Putting in economic mode.

The communicating systems allow to simulate the pumping of clear liquids in the sectors of housing (water rising in the upper floors of a residential building, offices, hospitals), agriculture and industry (catchment from a well, a spring, a river, fire protection, etc.).
Particularly suitable for experimental areas thanks to several high-powered motors and an easily variable load. The equipment is designed to operate in TT or IT mode.

This bathroom platform is intended for the realization of an electrical installation in the various volumes of this one.
It is equipped with a frame, including three useful faces, the face "washbasin", the face "shower" and the face GTL. The last face allows, via a trap door, to give access to the interior of the structure.
This system allows learning in four main areas of activity:
- Prepare the realization of an installation
- Carry out the installation
- Commissioning and adjusting the installation
- Communicating

These areas of activity correspond in all respects to the references for the Bac Pro in Energy.

The RT 2012 thermal regulations and financial incentives are tending towards the use of photovoltaic systems, which will soon become essential with the future RT 2020 regulations (positive energy buildings).
There are many diplomas and training courses specialising in solar energy and the supply is likely to increase in the years to come.
The development of photovoltaics is leading to an increase in professional opportunities. Engineers and technicians are now in great demand and training courses are multiplying. Several professions are directly concerned by the design and installation of photovoltaic systems. Photovoltaics can be divided into three main sectors: solar farms, grid reinjection and isolated sites.
These three fields are very different in terms of power and strategy. 
The "Isolated site" strategy is the closest to the user and allows him to understand the functional chain of photovoltaics: production - storage - consumption.

The RT 2012 thermal regulations and financial incentives are tending towards the use of photovoltaics, which will soon become essential with the future RT 2020 regulations (positive energy buildings). positive). There are many diplomas and training courses specialising in solar energy and the supply is likely to increase in the years to come.
The development of photovoltaics is leading to an increase in professional opportunities. Engineers and technicians are now in great demand and training courses are multiplying. Several professions are directly concerned by the design and installation of photovoltaic systems. 

Our photovoltaic cell allows the student to carry out all operations from installation to operation.
You will also monitor the production (locally or remotely) as well as the complete maintenance of the installation. 

The EcolSun system is complete and autonomous and constitutes an ideal training tool for a photovoltaic installation technician.

The current and future thermal regulations tend to reduce the energy consumed in buildings for heating and therefore to design insulated and airtight building envelopes. Ventilation becomes essential and must contribute to the thermal regulation of buildings. There are different types of CMV for residential buildings, the simple flow, the simple flow hydro adjustable and the double flow hydro adjustable. The hydro adjustable CMVs are essential to respect the new standards. The double flow CMVs have the additional advantage of managing the temperature by rejecting air heated by the air drawn in. The EcolVTM bench has been designed to study the two types of single and double flow hydro adjustable CMV on the same support.

This workbench allows learning in four main areas of activity:
- Prepare the realization of an installation
- Carrying out the installation
- Commissioning and adjusting the installation
- Communicating
These fields of activity correspond in all respects to the reference documents for the Bac Pro in Energy.

A solar water heater is a solar energy collection device designed to provide partial or total domestic hot water (DHW).

This type of heating usually complements water heating systems that use other energy sources (electricity, fossil fuels, biomass, etc.); under certain conditions it can completely replace them.

As solar energy is renewable, this replacement effectively limits greenhouse gas emissions or nuclear waste production, which is why the installation of such devices is strongly encouraged by many states and communities through taxation, incentives and/or mandatory installation on new buildings.

Our educational solar water heater is equipped with solar collectors, hot water tank, regulator, datalooger*, circuit breaker and energy metering module and it meets all the requirements of the Industrial and Tertiary BAC PRO MELEC.